Manufacturing and Processing
Industrial Odor Control supplies vapor-phase activated carbon filters for manufacturing and processing operations. Our Hi-Flow Radial Filters serve ducted process exhaust and recirculating airstreams. Our refillable stainless steel inline filter treats compatible odors and vapors from low-flow equipment and tank vents.
Why Choose Our Odor Control Products?
Targeted Carbon Filtration
Select activated carbon media for the odors and compatible VOCs in your process airstream.
Filters for Ducts and Vents
Use Hi-Flow Radial Filters for ducted exhaust or recirculation. For low-flow process vents, choose a stainless steel inline configuration.
Refillable Housings
Replace spent media and reuse the housing. The stainless steel inline filter has a dedicated Tri-Clamp fill port for servicing.
Standard and Custom Options
Choose from three radial media capacities or ask about an inline configuration for your process conditions.
Featured Filters for Manufacturing & Processing
- Hi-Flow Radial Filter HRF-1.5 — Holds 1.5 ft³ of media in a 15-inch-diameter housing. Recommended exhaust airflow is 180 CFM at 0.5 seconds of contact time, up to 300 CFM at 0.3 seconds.
- Hi-Flow Radial Filter HRF-5 — Holds 5 ft³ of media. Recommended exhaust airflow is 600 CFM at 0.5 seconds of contact time, up to 1,000 CFM at 0.3 seconds.
- Hi-Flow Radial Filter HRF-7 — Holds 7 ft³ of media. Recommended exhaust airflow is 825 CFM at 0.5 seconds of contact time, up to 1,400 CFM at 0.3 seconds.
- Stainless Steel Inline Activated Carbon Vent Filter — The WVI-304SS is designed for 5 CFM and fits applications such as batch reactor vents, chemical storage tank vents, and small laboratory process exhaust points. Standard 16-gauge 304 stainless steel housing, optional 316 stainless steel, and 2-inch or 4-inch Tri-Clamp inlet and outlet connections.
Size the filter for the way the air moves through your system. In recirculating service, the HRF-5 data sheet lists an optimal airflow of 1,200 CFM at 0.25 seconds of contact time and a maximum recommended airflow of 2,000 CFM at 0.15 seconds. Media selection and contact time depend on the compounds in your airstream and your treatment goals.
Benefits for Manufacturing & Processing Facilities
| Benefit | Description |
|---|---|
| Treatment at the Source | Treat compatible odors and vapors in a dedicated vent or collected exhaust stream before discharge. |
| Sizing for Your Airstream | Match media volume and contact time to the airflow, target compounds, and treatment requirements. |
| Installation Flexibility | Fit a radial filter to existing ductwork or specify an inline filter for a dedicated process vent. |
| Serviceable Media | Plan for media changes based on operating conditions and outlet monitoring. |
Need Help Choosing a Filter?
Tell us where the air is collected and what you need to remove. We can help you choose the filter size, media, and blower configuration for your process.
For a sizing recommendation, please share:
- The odor source, target compounds, and estimated concentrations.
- Normal and peak airflow in CFM, along with air temperature and humidity.
- Duct or vent connection size and available static pressure if you have an existing fan.